Experiencing No Internet access, Unable to Reach Web pages, And running network Troubleshooter results “Windows can’t communicate with the device or resource (Primary DNS Server)”. That means your computer is unable to connect to the primary DNS server set by your internet service provider. Which caused due to various reasons such as your IPv4 or IPv6 settings not configured properly, you running a proxy server, a conflict with the network settings, or when the DNS server you are trying to access is temporarily unavailable and more. Whatever the reason, here we collected the best working solutions to fix can’t connect to DNS server windows 10.
Windows can’t communicate with the device or resource
Note: solutions below apply for computers, laptops, desktops, and tablets running the Windows 10, Windows 8/8.1, Windows 7 operating systems. Works for all major computer manufacturers (Dell, HP, Acer, Asus, Toshiba, Lenovo, Samsung).
- Whenever you face any network and Internet, related problems, the first thing we recommend to restart your PC including the network devices (Router, Switch, and modem if connected) that fix if any temporary gitch causing the issue.
- Temporarily Disable security software (Antivirus) VPN if installed and configured.
- Perform clean boot to check and make sure any third-party conflict not causing the issue.
- Run free System optimizer like Ccleaner to clear junk, temp files, browser cache, cookies and fix broken registry entries.
- Also open command prompt as administrator, type ipconfig /flushdns and enter key. Restart Windows and check now Internet connection started working.
Change your adapter settings
If Still the issue persists, let’s try changing the network/WiFi adapter settings:
- Press Windows + R, type ncpa.cpl and ok
- The Network connections screen will open.
- Locate your current network and right-click on it.
- Select Properties from the drop-down menu.
- Go to Internet Protocol Version 4 (TCP/IPv4). Click on the Properties button.
- Once in the General tab, select Obtain an IP address automatically as well as Obtain DNS server address automatically.
- Click OK for the changes to take effect.
After changing the settings, restart your PC and check if the issue has been resolved.
Switch to Google Public DNS
If the above option didn’t resolve the issue, try to use google public DNS in place of DNS server address that most probably fixes the problem. To do this
- Again open the Network connections window using ncpa.cpl command.
- Right-click on the Active network, Select Properties.
- Double click on Internet Protocol Version 4 (TCP/IPv4).
- Select Use the following DNS server addresses Radio button.
- Set Preferred DNS server to 126.96.36.199.
- And Alternet DNS server to 188.8.131.52
- Click OK to save your changes.
Now restart your PC and check your Internet connection.
Reset Winsock and TCP/IP Configuration
If none the previous methods have helped you, try resetting Winsock and TCP/IP configuration:
- Open the elevated version of your command prompt.
- Type the commands below and make sure you press Enter after each:
Type netsh winsock reset and press Enter.
Type netsh int ip reset and press Enter.
Type ipconfig /release and press Enter.
Type ipconfig /renew and press Enter.
Type ipconfig /flushdns and press Enter.
- After the type exit to close the command prompt, and restart Windows.
- Open a Web browser and check Internet connection started working.
Reinstall Network adapter
Again outdated, incompatible network adapter drivers also cause the problem fails to communicate with the device or resource We recommend update or Reinstall the network driver with the latest version to do this. Since your PC doesn’t have an active internet connection to the online download and update network adapter driver Lets perform the Reinstall option.
- Press Windows + R, type devmgmt.msc and ok
- Expand Network adapter,
- Right-click on installed driver select Uninstall Device.
- Click yes if ask for confirmation
- Restart Windows to completely uninstall the driver
- Most of the time on next restart Windows automatically install the build in Network driver
- If Windows fails to install, then open Device Manager, Action and select Scan for hardware changes.
Or on a different computer, Download the latest Network Adapter driver for your PC. Copy the same and run the setup.exe to manually install the driver. Restart PC and check Internet connection started working.
Did these solutions help to fix “Windows cannot communicate with the device or resource” ?let us know on the comments below, also Read The application was unable to start correctly (0xc000007b) windows 10